PGMFI Logo
Library> DesolderingTips Destinations: Home | Library | Change Log | Index
Search | Go

Some basic wisdom from my time with the desoldering tools: #DO NOT USE THE SUCTION ALL THE TIME #BE PATIENT. You need to wait for the solder to melt all the way through before sucking otherwise you'll be left with stuff to clean up #Rocking back and forth slowly (~1hz) often works well for difficult spots #The amount of heat you need is directly proportional to the amount of copper trace material surrounding the pin. You'll find that pin 15 gets stuck a lot as it is in a big fucking copper ground trace #Solder braid is your friend. Its cheap, and if used right will make your desoldering effort a very clean one.

Revision: r1.1 - 19 Feb 2004 - 23:01 GMT - guest { Edit | Attach | History | More }
Copyright © 2002-present by the contributing authors. All material on this collaboration platform is the property of the
contributing authors, and is covered by the Non-Commercial Share-Alike License unless explicitly stated otherwise.
Ideas, requests, problems regarding the PGMFI TWiki? E-Mail the WikiAdmin
Site Designed By: Digital Fusion   Need a website?

premiumssdvps.com - Powered by premiumssdvps.com